Product Description

The model of High Pressure Micro-powder Grinder:YGM7826,YGM8327,YGM9531 Vipeak tells you that: High Pressure Micro-powder Grinder is a super thin powder grinder machine developed on the basis of our many years of experience and advanced grinding technologies. It produces super thin power, and is applicable to all kinds of nonflammable and non-explosive materials with Mohs hardness below 9.It's finer finished grain, high efficiency and no pollution.And it also the wearing parts in the grinding chamber are wear-resistant, with a long replacement cycle. It's the ideally suitable grinder machine for grinding calcite, limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore and other more than 200 kinds of materials that Moh's hardness is below 6, non-explosive, non-flammable minerals. Working Principle of High Pressure Micro-powder Grinder: The main motor drives main axle and each layer of dial to rotate through reducer, and the rotating dial makes dozens of rollers roll and rotate in the ring by pintles. Big materials are reduced to smaller particles by crusher. Then they are sent to stock bin by an elevator. The electromagnetic vibrating feeder sends the materials evenly to the middle of the upper dial. Under the function of eccentricity, the materials fall into the grinding ring to be pressed, crushed and milled into small pieces by rollers. After being ground in the first layer, the materials fall into the second and the third layer for milling. High-pressure centrifugal blower sucks the outside air into the machine and brings the third layer-milled coarse power into the classifier. The rotating turbine in the classifier makes the coarse materials fall back for regrinding. The fine particles come into the cyclone collector with the air flow and are discharged by the discharge valve on the bottom of the collector. After being purified, the air flow with little dust is discharged through blower and muffler If you want to get more info,you can contact us by the ways below: Conpany Name:ZhengZhou Vipeak Crusher Heavy Industry Machinery Address: No.43,Tongbai Road, Zhengzhou, Henan, China Tel:86-371-67770550 Fax:86-371-67431834