Complete Line of temporary protective peelable coatings to provide temporary masking , protection, decoration or long term preservation. Applied as a liquid by spray ,roller or brush, these coatings dry to form a skin-tight plastic film which can simply be peeled away when required, without damage to the substrate surface.

Use
Pellable Coating which will form a skin tight protective film (Water Resistant). It is designed to be used on non porous various surfaces like Stainless Steel Aluminium Selected Plastics FRP Glass Polished Stones etc. It can be easily peeled off when desired. It can be used as a Maskant

Colour
It is supplied in Green and Blue colour. It can be supplied in transparent form also and any colour can be given on request

Health and Safety

Protect your skin and eyes while application use plenty of water in case of irritation eyes plenty of eater in case of irritation to eyes and skin and consult to doctor immediately

Application
Peelable Coating is a Sprayable and Brushable Grade SHAKE WELL BEFORE USE. Do not add any diluents / Spray gun should not contain residues of Oil Lacquer and Grease. Clean thoroughly with thinner. Spray the material with a pressure of 70 - 120 psi on the surface in a uniform coating. It can be recoated 2 or 3 times in the wet conditions to obtain a thicker dry coating. Allow coating to dry in a stream of hot/cold air. Sunligth or hot air can be used in enhancing the drying process.

Drying Time
Approx drying time is 45 to 60 mins depending on thickness of coating and ambient temp. Cured Film can be peeled off after 12 to 24 hrs depending on external ambient temp

Repair
If the dry film is ripped then it can be lifted and resealed by application of a fresh wet coat to the patch. It will rejoin and bond into the original film by itself

Removal
Easily stripped away by hand when required. We do no recommend removing in freezing conditions as the coating will be brittle

Coverage
1 kg of material will approx cover 100 - 250 sq ft of area at a dry film thickness of 50 to 100 microns. We recommend a minimum 120 microns DFT for easy film removal

Cleaning
All spray equipment brushes or rollers should be washed with thinner immediately after use

Storage
Shelf life is 6 months from mfg date Do not allow liquid to freeze. Store between 10°C to 30°C Store in a cool and dry place away from sunlight.

General Note
It is important that the product is thoroughly evaluated under production conditions before being commercially adopted (such an evaluation should incorporate a reference to ageing). The above r