Product Description

FEATURES * In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines. * Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes. * Individual high quality accelerometer for accurate and repeatable measurements. * Bearing condition monitoring function. SPECIFICATIONS Display: 4 digits, 18 mm LCD Measured values and makers (units, 10,and battery symbol) Transducer : Piezoelectric accelerometer Parameters measured: Velocity, Acceleration, and Displacement RPM and Frequency Measuring range : Velocity: 0.01-20.00 cm/s2 true RMS 0.000-16.00 inch/s2 Acceleration: 0.1-400.0m/s equivalent peak 0.3-1312 ft/s Displacement : 0.001-4.000mm 0.04-160.0 mil , equivalent pk-pk RPM (r/min) : 60-99,990 r/min Readings should be multiplied by 10 if the display show '10'. Frequency: 1-20 kHz Frequency range for measuring Acceleration : 10Hz. to 1kHz. In '1' mode 10Hz. to 10kHz. In '10' mode for bearing condition check Velocity : 10Hz. to 1kHz. Displacement : 10Hz. to 1kHz. Accuracy: ±5%+2 digits Metric/ Imperial conversion PC interface: RS232C Output: AC output 2.0V peak full scale (load resistance: above 10k) Power supply: 4x1.5 AAA size (UM-4) batteries Power off : 2 modes Manual off at any time Operating conditions: Temperature : 0-40 ? Humidity : below 90% RH Accessories included : Powerful rare earth magnet...1 pc. Accelerometer...................1 pc. Stinger probe (Cone)..........1 pc. Stinger probe (Ball)...........1 pc. Carrying case....................1 pc. Operation manual..............1 pc. Optional accessories: Headphones for use as electronic stethoscope Cable and software for RS232C