Product Description

AISI 316 SS Cover Plates Evaporator Brazed Plate Heat Exchangers for Industry Brazed plate condensers-flow principle The main components are the same as for the evaporator. The refrigerant enters at top left of the exchanger as hot gas and starts to condense on the surface of the channels until fully condensed, and is then slightly subcooled. The process is called "free condensation". In the enclosed condenser picture the light and dark blue arrows show the location of the brine connections. The refrigerant flows counter current in the opposite channel and is cooled. The light and dark red arrows indicate the locations of the refrigerant connections. Standard design The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer efficiency and to make them rigid. Standard materials Cover plates: Stainless steel AISI 316 Connections: Stainless steel AISI 316 Plates: Stainless steel AISI 316 Brazing material: Copper Particulars required for quotation To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following particulars: -flow rates or heat load required -temperature program -physical properties of liquids in question -desired working pressure -maximum permitted pressure drop Advantages of brazed plate heat exchangers in Industry and HVAC&R The Baode Brazed plate heat exchangers (BHE) have several advantages over traditional heat exchangers in Industrial and HVAC&R applications. -The high heat transfer efficiency of the BHE makes it extremely compact and also easy to install in places were space is limited. -The unit has no gaskets and is therefore suitable in applications were temperature and/or pressure is high e.g. in district heating. -The Baode supply system reassures that, no matter were you are on the globe, the BHE units are available with a very short delivery time.   Short delivery time. High quality Reasonable price Customer made Know-how design and customer support   - - - - Width | Height | Horizontal  port  distance | Vertical  port  distance | Thickness | Max Plates | Max flowrate  (M3/h) | Weight  (kg) | Heat exchange  area (m2) | Volume L | 111 | 525 | 50 | 466 | 13+2.35N | 100 | 12.7 | 2.6+0.19N | 0.050 (N-2) | 0.047 (N-2) | - - - -