Product Description

It is a Seatless & Glandless valve The valve up to the size 6” does not have any stuffing box. The salient feature of this valve is that of the piston operation. The piston slides between the two packing rings made of asbestos PTFE and does not rotate; hence there is minimum ware. The only warring part is the packing ring and that to after an extensive use. A ported lantern bush separates the two packing rings. The bottom ring rests on a cast machined groove of the body and upper packing ring is being held and remained pressed by a bonnet on top. The bonnet rests on the top ring, when tightened evenly by the nut of the stud presses the lantern bush, which in turn presses the bottom ring. This is done by keeping the valve in closed position. Thus the mechanism is aligned compressed and ready for operation. Here the bottom ring of the valve serves the purpose of the seat while the upper ring serves the purpose of a gland. The advantage of the valve is when any leakage is observed from the hole of the bonnet