Product Description

Real-Time conversion between 10GBASE-T (based on IEEE 802.3an) and 10GBASE-R (based on IEEE802.3ae) Conversion of media type between fiber (XFP connector) and twisted pair copper wire(RJ-45 connector). Console and USB port for extra management (optional) Both XFP and RJ-45 port can connect to other 10Gbps Ethernet switch for expansion. It will not obstruct the original Ethernet traffic. Subsidiary device for test on 10Gbps Ethernet switch with 10GBAST-T and/or 10GBASE-R Ports. It is a suitable subsidiary device of network equipment test between 10GBAST-T and 10GBASE-R. Powered by 12V DC from external adapter. High speed 10Gbps fiber/copper wire converter without packet loss. Test loopback function via console port.   Specifications Description: - - - - Interfaces | Left Side: One 10Gbps RJ-45 port One 10Gbps SFP+ port (mini-GBIC) Right Side: One RS-232 console port (RJ-45 connector) One Power jack | Wirespeed Cable Length | Up to 100 meters Cat.6a cable for Wirespeed transmission | Transceiver (PHY) | Teranetics chip for 10GBASE-T and NETLOGIC chip for 10GBASE-R | Temperature | Operating: 0 ? ~ 40 ? Storage: 0 ? ~ 50 ? | Humidity | Operating: 0% ~ 85% RH Storage: 0% ~ 85% RH | LED Display | Five LED (SFP+, LR, Link/Rx, Loopback A, B , SYS) SFP+ : SFP+fiber connector is connected LR : Connector of 10GBASE-LR Transceiver is plugged. Link/Act : Network is linked/active for A and B ports Loopback A, B : Indicate the Loopback mode of A and B ports is enabled at the same time SYS :System status | Power Source Type | AC 90V~240V to 12V DC adapter | Dimensions | 175 mm x 85.9 mm x 32.6 mm | - - - -